The characteristics of spinning are as follows:   (1) During the spinning process, the spinning wheel presses down the blank point by point, and the unit pressure is 2500-3500N/mm2. The spinning technology can process high-strength and difficult-to-deform materials, and the total deformation force required is also small, so spinning is

Technical characteristics of spinning:   1. Spinning processing belongs to the processing of partial continuity, the instantaneous deformation zone is small, and the total deformation force is small.   2. Some parts with complex shapes or difficult-to-deform materials are difficult or even impossible to process with traditional technology. They can

Spinning processing is an advanced processing technology with less and no cutting that integrates forging, extrusion, stretching, bending, ring rolling, cross rolling, and rolling. Spinning processing is currently widely used in rotating parts. Processing and forming. Spinning processing is based on the plastic characteristics of the material, the blank is

According to the current spinning processing industry’s evaluation standard for the processing process, it means that each process is evaluated according to the process flow. However, there is no unified evaluation standard for the entire spinning process. How to evaluate the spinning process Evaluation is still a difficult point, because

During the quality inspection, the spinning product processing manufacturer will judge whether the spinning processing parts produced are qualified according to the quality target requirements of the factory. It mainly depends on whether the plane has uneven points, whether the dimensional accuracy is appropriate, and whether it meets the production

In order to improve the quality of spinning parts, spinning manufacturers must conduct certain inspections on the surface texture defects of spinning parts. This has become an important method for quality inspection and control of spinning parts.   With the continuous improvement of the requirements of modern industrial institutions, the

Spinning manufacturer Xi’an Bosai Spinning Technology Co., Ltd. will discuss the factors affecting the spinning manufacturing process with you   (1) Type and structure of spinning die.   (2) The structural shape, size, surface processing accuracy and surface roughness requirements of spinning parts.   (3) The nature of spinning materials.

size The size of the hub is actually the diameter of the hub. The 15-inch and 16-inch hubs that people often say are the size (diameter) of the hub. Generally on a car, a large wheel hub and a high tire flatness ratio can have a good visual effect of

① Will look at the production date of the tires and also be anti-counterfeiting Rubber products have a service life, that is, a shelf life. Like a car door sealing strip, cracks and poor sealing will occur after a long time of use. As a rubber product, tires also have

At present, aluminum alloy wheels have been installed on many kinds of cars, from sports cars to high-performance cars, including MPV and SUV, and off-road vehicles. Here are some advantages of using aluminum alloy wheels: ◆Fashionable style The appearance of your car is undoubtedly the first thing that can attract

When buying second-hand cars, many people will find that the wheel hubs are severely worn. The lighter ones are scratches and bumps, and the heavy ones are deformed and out of round (not purely round). Wheel hubs are the most important hardware in driving safety. They must not be sloppy,

I believe that most car owners have ridden bicycles when they were young, and they must have some knowledge of bicycle tires. Therefore, after growing up, some car owners may derive their knowledge of bicycle tires into car tires. Maybe I’m thinking, aren’t they all tires? Are they all made